MPPT 60A 80A 100A Solar Charge Controller
MPPT 60A 80A 100A Solar Charge Controller
The solar charge controller with the most advanced MPPT control algorithm and the maximum power point of the photovoltaic array can be quickly tracked in any environment so as to get the maximum energy from the solar panel and significantly improves the utilization of the solar panel. energy in the solar system. It can be used in communication base station, home power system, traffic light, solar street light, courtyard lamp systems, etc.
Characteristic:
- Advanced MPPT maximum power point tracking technology, tracking efficiency is not less than 99.5%.
- The Ico is designed to dynamically display the operating data and operating status of the equipment.
- Compatible with Seal, GEL, battery charging
- flooded, LifePO4
- Dual 5V USB charging ports
Automatic identification 5.12V/24V/36V/48V
- Overvoltage protection
- Overcurrent protection
- Overtemperature protection
9.7 kinds of working mode selection
- Controller parameter display (working mode, battery voltage, photovoltaic charging current, battery discharging current, product working temperature, delay time);
- Some of the controller parameters can be changed by the user to set and save.
12, with backlit display
Argins 7 kinds of working mode selection and fibers
- Charging way: in any case, never run out of battery.
-
- Light Control Mode: When the controller detects nights, it delays ten minutes and starts to discharge;
- Light and time delay control mode: when the controller detects nights, it delays ten minutes, starts discharging and counting, if the timer stops zero, discharging stops. The longest delay duration is 11:59 pm.
- Universal Control Mode: Under the trouble-free condition, it always keeps draining.
- Manual control mode: Use "for draining
• less".
- Timing control mode: opens or closes the drain regularly.
-
Test Mode: It is the same as the light and delay control mode, but only loses ten minutes of delay.
- The controller still discharges under low voltage protection. Touch-holding "qiau" for 5 seconds, the discharge continues on the way out. But the drain is only blocked by hand.
Note that this performance can damage the battery, be careful with it!
Controller Parameter:
Model: SY6048
Battery voltage: 12V/24V/36V/48V Auto
Charging current: 60A
Maximum PV input power: 720W Max
SolarInput(Voc): 15-25V (12V battery)
Maximum PV input power: Maximum solar input
1440W (Voc): 30-50V (24V battery)
Maximum PV input power: Maximum solar input
2160W (Voc):45-75V (36V battery)
Maximum PV input power: Maximum solar input
2880W (Voc):60-100V (48V battery)
Controller Parameter:
720W 1440W 2160W 2830W
Model: SY8048
Battery voltage: 12V/24V/36V/48V Auto
Charging current: 60A
Maximum PV input power: 720W Max
SolarInput(Voc): 15-25V (12V battery)
Maximum PV input power: Maximum solar input
1440W (Voc): 30-50V (24V battery)
Maximum PV input power: Maximum solar input
2160W (Voc):45-75V (36V battery)
Maximum PV input power: Maximum solar input
2880W (Voc):60-100V (48V battery)
Controller Parameter:
720W 1440W 2160W 2830W
Model: SY8048
Battery voltage: 12V/24V/36V/48V Auto
Charging current: 80A
Maximum PV input power: Maximum solar input
960W (Voc):15-25V (12V battery)
Maximum PV input power: Maximum solar input
1920W (Voc):30-50V (24V battery)
Maximum PV input power: Maximum solar input
2880W (Voc):45-75V (36V battery)
Maximum PV input power: Maximum solar input
3840W (Voc):60-100V (48V battery)
Controller Parameter:
Recommended articles
Model
SY8048
battery voltage
24V
36V
48V
15V-2SV 30V-S0V 45V-75080-100V
mour vone
Maximum PV
2880W| 3840W
Model: SY10048
Battery voltage: 12V/24V/36V/48V Auto
Charging current: 100A
Maximum PV input power: Maximum solar input
1200W (Voc):15-25V (12V battery)
Maximum PV input power: Maximum solar input
2400W (Voc): 30-50V (24V battery)
Maximum PV input power: Maximum solar input
3600W (Voc):45-75V (36V battery)
Maximum PV input power: Maximum solar input
4800W (Voc):60-100V (48V battery)